Irrigation Engineering notes pdf | Free Download

Introduction of Irrigation Engineering

Irrigation is the science of applying water artificially to the land in accordance with the crop water requirements through the crop period to full fledged nourishment of the crop. Irrigation Engineering notes is given at the end of this article; you can download it.

The basic objective of irrigation is to supplement water to the land so as to obtain optimum crop yields.

Objectives of Irrigation Engineering

  • Design a surface and groundwater irrigation system.
  • Operate & manage irrigation systems.
  • Design infrastructure needs for acquisition, conveyance, distribution, and control for regulated flow of water from the source to the former fields.
  • Design removal of excess water to maintain condition for crop production.

Necessity of Irrigation

Basic sources of food, cloth, & shelter are the plants, To grow plants, water is essential, and a plant cannot grow properly if there is a drought during its cropping season.

The necessity of irrigation is summarized below.

(a) Inadequate rainfall: Inadequate rainfall occurs when the seasonal rainfall is less than the minimum requirement for the satisfactory growth of the crop.

(b) Uneven distribution of rainfall: Uneven distribution of rainfall occurs when the rainfall is not evenly distributed during the crop period through cultivated areas.

(c) Improvement of perennial crop yield: Some crops require irrigation throughout the major parts of the year, but the rainfall fulfills the demand during the rainy season only, and in the remaining part of the year, irrigation is necessary.

(d) Development of agriculture in the desert areas: In the desert area, where the rainfall is very scanty, irrigation is required for the development of agriculture.

(e) Insurance of drought: irrigation may not be required during the normal rainfall condition and can be necessary during drought.

Types of Irrigation System

(a) Gravity flow / Surface water flow irrigation: In this system, no irrigation pump is involved, Here, water is distributed across

(b) Tank or reservoir irrigation: tanks or reservoirs are used for preserving the local rainfall and water from streams & rivers for later use in irrigation.

(c) Lift irrigation or underground irrigation: The water is lifted to the delivery chamber from underground sour The delivery chamber is located of the topmost point of the commanded area. Then, water is supplied to agricultural land from delivery chamber by gravity flow.

Function/Advantages of Irrigation System

(a) Yield of Crops:- In periods of low rainfall or drought, the yield of crops may be increased by irrigation systems.

(b) Protection from famine: The food production of a country can be improved by ensuring the growth of crops by availing the irrigation facilities. This helps a country to a famine situation.

(c) Improvement in cash-crops:- crops: irrigation helps to improve the cultivation of cash crops like vegetables, fruits, tobacco, etc.

(d) prosperity of formers: when the supply of irrigation water is assured, the farmers grow more than two crops in a year on the same land. Thus, the farmers may earn money and improve their living standards.

(e) Hydroelectric power generation: In some river valley projects, multipurpose reservoirs are formed by constructing high dams where hydroelectric power may be generated along with the irrigation system.

(f) Water Supply: The irrigation canal may be the source of water supply for domestic & industrial purposes.

Disadvantage of Irrigation

1) Increase pollution: groundwater contamination by nitrate from urea through seepage of irrigation wills, fubowels, etc. causes disease anemia. Pesticides and insecticides cause environmental pollution. Water resources contamination.

2) Water logging:- Due to over irrigation, the water is logged for a long time, due to poor aeration in the root zone, reducing the crop yield.

3) Outbreak of waterborne diseases: When continuous water is supplied in agricultural land, due to the colder & damper climate, it will be the place for shelter for breeding of mosquitoes & bacteria.

Read more on Irrigation Engineering notes below. You can download it for free.

What will you get in Irrigation Engineering notes?

Irrigation Engineering notes

Table of Contents for “Irrigation Engineering notes”

1. Introduction to Irrigation Engineering

  • Importance of Irrigation
  • Scope in Agriculture and Water Management

2. Irrigation Systems

  • Surface Irrigation
  • Sprinkler Irrigation
  • Drip Irrigation

3. Water Sources for Irrigation

  • Surface Water Sources
  • Groundwater Sources
  • Rainwater Harvesting

4. Soil-Water-Plant Relationship

  • Soil Moisture and Its Importance
  • Crop Water Requirements
  • Evapotranspiration

5. Design of Irrigation Systems

  • Canal Design and Types
  • Irrigation Efficiency
  • Conveyance and Application Efficiency

6. Hydrology in Irrigation

  • Water Budget in Irrigation Systems
  • Runoff and Infiltration
  • Measurement of Flow Rates

7. Drainage Systems

  • Importance of Drainage in Irrigation
  • Design of Drainage Networks
  • Waterlogging and Salinity Control

8. Water Management

  • Scheduling of Irrigation
  • Water Saving Techniques
  • Impact of Over-Irrigation

9. Modern Irrigation Techniques

  • Use of Sensors and Automation
  • Precision Irrigation
  • Role of Technology in Efficient Water Use

10. Case Studies and Applications

  • Examples of Efficient Irrigation Projects
  • Lessons Learned from Field Implementations

11. Conclusion and Exam Preparation Tips

  • Summary of Key Concepts
  • Best of Luck

Read more in the Irrigation Engineering notes given below.

Read Also,

Construction Project management pdf | Free Download

Design of RCC Structures notes | PDF Free Download

Concrete technology Handwritten notes pdf

Structural analysis notes | PDF Free Download

Share On:

"Structural Engineer" with over 5 years of proven expertise in estimation, structural design, and surveying. I specialize in creating safe, efficient, and sustainable structures that combine innovation with practicality.