Concrete technology Handwritten notes pdf

Concrete is a composite mixture of binder, aggregate. water, of sometimes admixtures too.

The uniform mixture of a well-proportioned amount of cement, sand ( fine aggregate) , crushed stone (coarse aggregate), water, and sometimes other admixtures is called coment concrete. You will get Concrete technology Handwritten notes pdf at the last of this article.

On allowing sufficient time to gain the strength, the plastic mixture ( called as fresh Concrete ) yields a solid, strong hard mass, known as hardened concrete.

Objective of Concrete Technology

  • To Inspect & Supervise concrete works
  • To carry out mix design of concrete
  • To Test various properties of fresh & hardened Concrete
  • To analyze & Design simple masonry structure.
  • To conduct tests on masonry units & masonry structures.

Structural Uses of Concrete

Concrete technology Handwritten notes pdf

Cement concrete is widely used in almost every civil  engineering constructions like buildings, bridges, const. dams, tunnels, tanks, etc.  It is commonly used construction material due to following reasons:.

(a) Resistant to weather/air resistant
(b) Strength increases with time
(c) Canbe be cast into various shops &sizes.
(d) Constituents are cheap & readily available.
(e) Economical & energy efficient.
(f) Optimum environmental performance
(g) Durable

The major area of use of cement concrete

  • Bridge
  • Foundation/Abulment of steel structures
  • Tunnel, sewer& underground structure.
  • Slopestabilization / Soil improvement by shortcreating, retaining structures, etc.
  • Offshore structures.
  • Nuclear Shield
  • Refractory fireproofing
  • Reinforced Concrete, pressed Concrete, Precast concrete, etc.

Constituents of Concrete:

1.  Aggregate:

Concrete is made by mixing four major constituents: cement, fine aggregate (sand) , course aggregate ( crushed stone), and water. The properties of the concrete can be changed using other different materials, which are termed as admixtures.

Aggregate is a chemically inactive, inert material obtained from the disintegration of relatively strong rocks, eg: pebbles. graves, broken stones, sandstones. It contributes 70–80% of the volume of hardened concrete.

Properties of Good aggregate

  • It must be inert and soundness
  • It should have good strength.
  • It should have high Bond strength
  • Shape- angular aggregate are best due to good interlocking.

2. Cement

Material having property of adhesion of cohesion between different materials to form a strong bond between them.  Cement is main constituent of concrete and need water for hydration reaction. It is manufactured by dry & wet process.

The composition of cement are given as,

(1) Lime ((CaO)

(2) Silica (SiO2)

(3) Alumina (Al2O3)

(4) Calcium Sulphate/ Gypsum (CaSo4)

(5) Iron Oxide (Fe2O3)

(6) Magnesia (MgO)

(7) Sulphur Trioxide (SO3)

(8) Alkalies,

Types of cement

  • Ordinary portland cement
  • Colored cement
  • Portland pozzobona cement
  • Blast furnace slog cement
  • Rapid Hardening Cement
  • Water Repellent Cement
  • Rapid High Alumino Cement
  • Hydrophobic Cement
  • White cement
  • Acid Resistant Cement
  • Low heat cement
  • Quick setting cement

Test of cement

  1. Test of cement
  2.  Fineness Test
  3. Normal Consistency Test
  4. Setting Time Test
  5. Soundness Test
  6. Specific gravity
  7. Tensile strength Test
  8. Compressive strength Test

Read more on Concrete technology Handwritten notes pdf below. You can download it.

What will you get in Concrete technology Handwritten notes pdf?

Table of Contents for “Concrete technology Handwritten notes pdf”

  1. Introduction to Concrete Technology
    • Definition and Overview
    • Importance in Civil Engineering
  2. Constituents of Concrete
    • Cement
    • Aggregates
    • Water
    • Admixtures
  3. Properties of Fresh Concrete
    • Workability
    • Slump Test
    • Compaction
    • Bleeding and Segregation
  4. Mix Design
    • Principles of Mix Design
    • Methods of Mix Design
    • Factors Affecting Mix Design
  5. Curing of Concrete
    • Methods of Curing
    • Importance of Curing
    • Effect of Curing on Strength and Durability
  6. Hardened Concrete Properties
    • Compressive Strength
    • Tensile Strength
    • Durability
    • Shrinkage and Creep
  7. Special Types of Concrete
    • High Strength Concrete
    • Lightweight Concrete
    • Fiber Reinforced Concrete
    • Self-Compacting Concrete
  8. Concrete Testing
    • Compressive Strength Test
    • Tensile Strength Test
    • Non-Destructive Testing (NDT) Methods
  9. Concrete Deterioration and Repair
    • Causes of Concrete Deterioration
    • Methods of Repair
    • Prevention Techniques
  10. Conclusion

Read Also,

Structural analysis notes | PDF Free Download

Estimation and Costing Handwritten notes pdf

Complete Bar Bending Schedule for Different Structure (Free e-Book)

Foundation footing detail drawings with .PDF

Share On:

"Structural Engineer" with over 5 years of proven expertise in estimation, structural design, and surveying. I specialize in creating safe, efficient, and sustainable structures that combine innovation with practicality.