Different types of TMT bars | General Uses of different grade of TMT bars

What is tmt bars?

TMT bars are a kind of reinforcement bars. It stands for Thermo mechanically treated bars. There are Different types of TMT bars which are the hot rolled bar of varying diameters used as tension bars in concrete to strengthen its tensile strength of the concrete.

Different types of TMT bars | General Uses of different grade of TMT bars

TMT bars are high strength and high ductile bar having 2 layers. The outer layer is hardcore and the inner core is softcore. In general, the strength of reinforcing bars can be increased by cold twisting, microalloying, thermomechanical treatment, and increasing carbon content.

These rebars undergo thermomechanical treatment which refers to a series of processes.

  1. Quenching: Quenching is a kind of surface treatment of steel. In quenching steel is rapidly cooled through water, air, or oil. Quenching makes the surface of steel hard.
  2. Self-tempering: Tempering is a process of making the steel ductile. The inner core of the bars is still hot, so allowing heat to flow from core to surface.
  3. Atmospheric Cooling: In this phase, bars are let cool under atmospheric temperature. This process increases the tensile strength that makes it weldable and ductile.

Features of TMT bars

  • Enhanced ductility and malleability.
  • They are more resistant to rust.
  • Improved thermal resistance
  • Weldable and no loss in strength during welding due to low carbon content.
  • They have high bonding strength with concrete.
  • They provide high yield strength and toughness
  • They are economically safe in use.

Different grades of TMT bars | Different types of TMT bars

There are 9 grades of TMT bars available. According to the IS 1786, the maximum value of the metals and non-metals allowable during the manufacturing of TMT bars are tabulated below.

Chemical Properties  Maximum Value
 Fe415Fe500Fe550Fe600
Carbon0.30.30.30.3
Sulphur0.060.0550.0550.04
Phosphorous0.060.0550.0550.040
Sulphur and Phosphorous0.1100.1050.10.075
Mechanical properties  Minimum Value (MPa)
Yield Strength415500550600
Tensile Strength1.25*yield strength545585600
Elongation14.5%12%8%8%

General Uses of different grade of tmt bars

  • Fe 415, Fe 415D

They give yield strength of 415 N/mm2 and Tensile strength not less than 485 N/mm2 . They have higher uniform elongation make these bars suitable for earthquake prone zones. They are also resistant to rusting.

  • Fe 500, Fe 500D

They are also used in normal residential buildings but are more preferred in bridges and multiple stories, underground structure. Fe 500 give high corrosion resistance, excellent bendability and great resistance on dynamic loading.

  • Fe 550, Fe 550D

They give slightly more yield strength and tensile strength. They are basically used in coastal areas, marine area and underground structures.

  • Fe 600

These bars are used where high tensile strength is required.

 After all choice of grade of steel is all about the owner and requirements of site condition.

I hope this article on “Different types of TMT bars” remains helpful for you.

Happy Learning – Civil Concept

Contributed by,

Civil Engineer – Rukshana Shresth

Read Also,

Calculate weight of steel bar | Quantity of steel bar in circular slab

Different techniques of heat treatment of steel with example

Easy way to calculate unit weight of steel rod | 6 Types of steel reinforcement

Size of steel bars used for Construction – Civil Concept

Share On:

"Structural Engineer" with over 5 years of experience in estimation, structural design, and surveying. I am passionate about using my skills to create safe and sustainable structures. I am also a keen writer, and I enjoy sharing my knowledge and experiences with others.

Your Comment